Measuring the resveratrol content in a sample using UV-Vis (Ultraviolet-Visible) spectroscopy is a common and reliable analytical technique. Resveratrol is a natural compound found in grapes, red wine, and some other plants, known for its potential health benefits. UV-Vis spectroscopy works based on the principle that molecules absorb light at specific wavelengths, and this absorption can be used to quantify the concentration of a substance in a sample.

Materials and Equipment:

UV-Vis spectrophotometer
Resveratrol standard solution (of known concentration)
Sample containing resveratrol
Appropriate cuvettes or glass vials
Solvents (typically ethanol or methanol)
UV-Vis spectroscopy software
Procedure:

Preparation of Standard Solutions:

Prepare a series of standard solutions of resveratrol with known concentrations. These standards will be used to create a calibration curve.
Sample Preparation:

Extract or prepare sample containing resveratrol. If the sample is a solid, you may need to extract the resveratrol using an appropriate solvent (e.g., ethanol or methanol). Ensure that the sample is properly homogenized and filtered if necessary.
Blank Solution:

Prepare a blank solution using the same solvent used for the standards and sample. This blank will be used to zero the spectrophotometer.
Instrument Setup:

Turn on the UV-Vis spectrophotometer and allow it to warm up.
Set the wavelength to the appropriate range for resveratrol absorption, which is typically around 306-308 nm.
Calibrate the instrument using the blank solution.
Measurement:

Measure the absorbance of the blank solution at the chosen wavelength to zero the instrument.
Measure the absorbance of each standard solution and sample at the same wavelength.
Calibration Curve:

Plot a calibration curve with absorbance (y-axis) against the concentration of resveratrol standards (x-axis). The curve should be linear.
Use this calibration curve to determine the concentration of resveratrol in sample based on its absorbance.
Calculations:

Calculate the resveratrol content in sample using the calibration curve equation.