Sodium lauryl sulfoacetate (SLSA, Bath Bomb Foamer)
Mild surfactant: Provides rich, creamy foam with a soft skin feel—much gentler than SLS (sodium lauryl sulfate)
Cart
No products
No products
Mild surfactant: Provides rich, creamy foam with a soft skin feel—much gentler than SLS (sodium lauryl sulfate)
Foaming Mild Surfactant.
Appearance: Fine, off-white powder. Highly water-dispersible.
pH in 1% solution: ~6–8 (skin-friendly range).
Mild surfactant: Provides rich, creamy foam with a soft skin feel—much gentler than SLS (sodium lauryl sulfate).
Cleansing: Excellent at lifting oils and soils without stripping the skin or hair.
Foaming booster: Enhances foam volume and stability when combined with other surfactants (e.g., cocamidopropyl betaine).
Dispersing agent: Helps suspend insoluble additives (clays, pigments) uniformly.
| Recommended Inclusion Level | |
|---|---|
| Shampoos & Body washes | 5–15 % |
| Bubble baths & bath bombs | 20–40 % (as foaming base) |
| Solid cleansing bars | 30–50 % (blended with fatty acids) |
| Facial cleansers | 2–8 % |
Hydration
Pre-slurry SLSA in a small amount of glycerin or propanediol to avoid dust and ensure uniform hydration.
Order of addition
Disperse into warm water (< 60 °C) under gentle stirring.
Add co-surfactants (e.g., amphoteric or nonionics) after SLSA is fully hydrated.
pH adjustment
Final pH should fall between 5.5–7.0. If needed, adjust with citric acid or sodium hydroxide.
Temperature sensitivity
Dissolves best at 40–60 °C; avoid overheating (> 70 °C) to prevent mild decomposition.
Good with:
Amphoteric surfactants (e.g., cocamidopropyl betaine) for foam stabilization.
Nonionic surfactants (e.g., decyl glucoside) to soften foam.
Hydrotropes (e.g., sodium citrate) to enhance clarity.
Caution with:
Strong electrolytes (e.g., high salt levels) can reduce foaming.
Very high levels of anionic surfactants (e.g., SLS) may reduce mildness benefits.
Shampoo: 10 % SLSA, 2 % cocamidopropyl betaine, 1 % panthenol, 0.5 % fragrance.
Bath bomb: 30 % SLSA blended with 20 % baking soda, 20 % citric acid, 10 % cornstarch, plus color and fragrance.
Solid bar: 40 % SLSA + 30 % stearic acid + 15 % cetyl alcohol + 5 % shea butter + 5 % water/glycerin slurry + 5 % additives.
How to use: For cleansing products.
Mixing method: Mix in water, can withstand heat.
Usage rate: 1-15%
Product Description: White powder
Solubility: Soluble in water.
Storage method: Store at room temperature, close the bottle tightly and avoid sunlight. The product has a minimum shelf life of 2 years.
INCI Name : Sodium lauryl sulfoacetate
| Mechanism | - |
| Appearance | - |
| Longevity | - |
| Strength | - |
| Storage | - |
| Shelf Life | - |
| Allergen(s) | - |
| Dosage (Range) | - |
| Recommended Dosage | - |
| Dosage (Per Day) | - |
| Recommended Dosage (Per Day) | - |
| Mix Method | - |
| Heat Resistance | - |
| Stable in pH range | - |
| Solubility | - |
| Product Types | - |
| INCI | - |